Glock 17/19 Gen 3–5 – IWB Holster – Light-Bearing w/ Integrated Magazine Caddy – INCOG-X
PLEASE DOUBLE CHECK DETAILS AND FITMENT BEFORE PURCHASE.
The Safariland INCOG-X gives Glock 17 and Glock 19 shooters a premium AIWB/IWB rig with light-bearing support and an integrated spare mag caddy built into the package. This Haley Strategic collaboration uses a microfiber suede-wrapped Boltaron body for deep concealment, solid retention, and a little less misery against your skin than bare plastic.
Available options are organized below under Variants. Verified finishes in this batch are Black, Multicam Black, Multicam, and Woodland Camo. This model is built for Glock 17 and Glock 19 Gen 3, Gen 4, and Gen 5 pistols with specific supported weapon lights.
Fitment
- Fits Glock 17 Gen 3, Gen 4, and Gen 5
- Fits Glock 19 Gen 3, Gen 4, and Gen 5
- Light-bearing configuration
- Right-hand draw
- Integrated magazine caddy included
- Also listed for select configurations including Glock 19X, Glock 45, Glock 47, Glock 22 Gen 3/4, Glock 23 Gen 3/4, and Glock 26 Gen 3/4/5 when paired with a supported light-bearing setup
Officially Supported Lights
- Streamlight TLR-7
- TLR-7A
- TLR-7 Sub
- TLR-7 HL-X
- Surefire XC-1-B
- Surefire XC-1-C
- Surefire XC-2
- Inforce Wild 1
- Inforce APL C
- Nightstick TCM-550XL
- Nightstick TCM-10
- SIG Romeo Foxtrot 1X
- SIG Romeo Foxtrot 2R
- Viridian CTL
Does NOT fit
- Not a universal-fit holster for all handgun lights
- Do not assume compatibility with every light shown in distributor dropdowns or screenshots
- Do not use this holster without the correct supported weapon light installed, since retention depends on the light-bearing setup
What it does
This setup keeps your pistol and reload together in one clean concealment rig while still giving you adjustable passive retention and clip positioning for ride height and cant tuning. It is built around a light-bearing draw setup, not a generic one-size-fits-whatever shell.
Why it’s worth it
This is the better version of “one rig, one problem solved.” You get a proven concealment platform, a softer exterior against the body, and a built-in reload without cobbling together a Frankenstein belt setup. More importantly, the fit is tied to specific supported lights instead of vague marketing fluff.
Specs
- Inside-the-waistband holster
- INCOG-X series
- Haley Strategic collaboration
- Light-bearing design
- Integrated magazine caddy
- Microfiber suede-wrapped Boltaron construction
- Right hand
- Available finishes in this batch: Black, Multicam Black, Multicam, Woodland Camo
- Officially supported lights include: Streamlight TLR-7, TLR-7A, TLR-7 Sub, TLR-7 HL-X, Surefire XC-1-B, XC-1-C, XC-2, Inforce Wild 1, Inforce APL C, Nightstick TCM-550XL, Nightstick TCM-10, SIG Romeo Foxtrot 1X, SIG Romeo Foxtrot 2R, and Viridian CTL
What’s included
- Holster body
- Integrated magazine caddy
- Belt clip hardware
Install notes
Set retention and ride height before carry. Confirm your exact light-bearing handgun setup locks in correctly and allows a clean draw and safe reholster. This light-compatible model should not be carried without the proper weapon light installed.
Verify before you buy
Verify your exact Glock model and generation, supported light model, hand orientation, and desired finish before purchase. Do not assume fit just because a light appears in a broad retailer list or screenshot.
Lights that should not be claimed as officially confirmed for this exact holster unless separately verified include examples such as Inforce APL, Insight Technology M3, Insight Technology XTI Procyon, Nightstick TCM-365, Nightstick TWM-350/TWM-30, Nightstick TWM-850XL, Olight PL-Pro Valkyrie, Olight PL1 Valkyrie, Streamlight TLR-1, TLR-1 HL, Surefire X200, X300, X300U, and X300V.
⚠ Glock Disclaimer
IronKells Armory LLC is not affiliated with, endorsed by, or sponsored by Glock, Inc. or Glock Ges.m.b.H.
All references to GLOCK® are used solely to identify firearm models, parts compatibility, and fitment information for customers. Glock is a federally registered trademark of Glock, Inc. and Glock Ges.m.b.H.
Any product sold on this site referencing Glock is aftermarket, not OEM, and is not manufactured by Glock. Glock does not warranty, authorize, or guarantee the performance, safety, or reliability of any third-party components or modifications.
Firearm parts should be installed by a qualified armorer or gunsmith. Improper installation, modification, or use of aftermarket components may affect firearm safety, reliability, and void manufacturer warranties. By purchasing and installing third-party parts, the buyer assumes all responsibility for safe handling, installation, function testing, and use of their firearm and accessories.
⚠ Install & Compatibility Disclaimer
Installation should be performed by a qualified armorer or gunsmith. Improper installation, modification, or use may affect firearm safety and reliability. Buyer is responsible for verifying compatibility, performing proper function testing, and ensuring safe operation.
