GHOST INC FIRING PIN SPRING 3-PACK (GLOCK GEN 1–5)
CONTROL YOUR TRIGGER’S SOUL — 4lb, 4.5lb & 6lb
This isn’t a grab-bag. It’s a tuning kit. The Ghost Inc 3-Pack gives you three calibrated striker springs — 4.0 lb (light), 4.5 lb (balanced), and 6.0 lb (duty) — so you can swap, test, and lock in the exact striker tension your Glock needs. Whether you’re building a paper-punching race gun, a reliable patrol hammer, or a no-nonsense carry piece, this pack lets you dial it in without guesswork.
-
Includes: (1) 4.0 lb, (1) 4.5 lb, (1) 6.0 lb firing-pin/striker springs — fits Glock Gen 1–5.
-
Purpose: quick tuning across light → balanced → duty pull weights.
-
Built for use: range-tested in Texas, engineered for repeatable performance — unapologetically not stock.
-
Easy swap: simple drop-in changes to test striker tension and trigger feel.
-
Ideal for: tuners, armorers, competition shooters, and anyone who demands consistency.
Want guidance on which spring to run with specific connectors or plunger setups? Hit the IronKells Forge Files — we’ve got tested combos and real-world results to get you where you want to be.
Grab the 3-pack. Stop guessing. Make your Glock run like you.
SPRING WEIGHT BREAKDOWN:
Know your setup. Run it right.
| Spring | Ideal Use | Pull Impact | Primer Ignition | Forge Files Notes |
| 4.0 lb | Target / Competition Only | Lightest | Weakest | Combine with a 6.0 lb trigger spring and 3 lb - 3.5 lb connector for ~2.0–3.0 lb pull. NOT for carry or duty use—light strikes possible on hard primers. |
| 4.5 lb | Range / Hybrid Setup | Light | Weak-Moderate | Good balance if you’re pushing light but still want to avoid Russian ammo failure. Add a polished striker for max results. |
| 5.0 lb | Everyday Use / Mild Upgrades | Moderate | Factory | Great with mild connector upgrades or trigger polish jobs. Glock-standard power. Boring, but it won’t fail you. |
| 6.0 lb | All-Weather / Hard-Primer Ready | Firm | Strong | Best with steel-case ammo or “budget” primers. Great for suppressor use, sub-zero climates, or if your Glock’s your backup on a boar hunt. |
| 6.5 lb | Carry Gun / Max Reliability | Firmest | Strongest | If you CCW, protect others, or value reliability over feel, this is your go-to. Pair with a 3.5–4.5 connector to smooth it without risking light strikes. |
Compatible with Glock Gen 1–5.
(Not for Glock 42, 43, 43X, 48. We love them. But no.)
WHAT THE SPRING ACTUALLY DOES:
The firing pin spring (aka striker spring) controls how hard your striker hits the primer.
-
Lighter spring = lighter trigger pull but weaker ignition.
-
Heavier spring = stronger ignition but a stiffer trigger break.
That’s why spring choice affects both your trigger weight AND your reliability—especially with cheap ammo or steel-case primers.
IRONKELLS REAL-WORLD TESTING
We’ve run these spring setups across everything from match-grade builds to bugout bags:
-
2-2.5 lb Pull Setup (Too Light for Carry)
-
4.0 lb striker spring
-
6.0 lb trigger spring
-
Ghost Angel 3.0 connector
-
Polished OEM striker
- Timney Alpha Competition Trigger
-
-
3.5 lb - 4.0 lb Balanced Setup/EDC
-
4.5 or 5.0 lb striker
-
6.0 trigger spring
-
3.5 lb connector
-
Johnny Glocks, Killer innovation, Zev shoe
-
-
4.75–5.25 lb Duty/Carry Setup
-
6.0 or 6.5 lb striker spring
-
5.0 lb OEM trigger spring
-
Ghost Ultimate or Edge connector
-
Factory striker or NDZ chrome striker
-
⚠️ Always test your full setup with your carry ammo. A great trigger means nothing if your primer doesn’t ignite when it counts.
RECOMMENDED PAIRINGS
For full performance builds, pair these with:
-
IronTrigger™ Kits → Full drop-in spring kits & trigger shoes
-
R.I.P.™ Recoil Packs → Performance-tuned spring kits with matched striker, plunger, and comp options
Forge Files — Real Data, Not Opinions
We don’t guess and we don’t hype. The Forge Files are IronKells’ testing library: measured pull weights, connector angles, striker springs, plunger spring combinations, and real-world ignition data using common carry loads. Click the Forge Files link on this page for step-by-step build sheets, load-specific notes, and the test logs we ran on Gen5 frames. If you need advice please take a look at our FORGE FILES!!
Here are relevant options to get you started:
⚠ Glock Disclaimer
IronKells Armory LLC is not affiliated with, endorsed by, or sponsored by Glock, Inc. or Glock Ges.m.b.H.
All references to GLOCK® are used solely to identify firearm models, parts compatibility, and fitment information for customers. Glock is a federally registered trademark of Glock, Inc. and Glock Ges.m.b.H.
Any product sold on this site referencing Glock is aftermarket, not OEM, and is not manufactured by Glock. Glock does not warranty, authorize, or guarantee the performance, safety, or reliability of any third-party components or modifications.
Firearm parts should be installed by a qualified armorer or gunsmith. Improper installation, modification, or use of aftermarket components may affect firearm safety, reliability, and void manufacturer warranties. By purchasing and installing third-party parts, the buyer assumes all responsibility for safe handling, installation, function testing, and use of their firearm and accessories.
