16-Inch 2 Pistol Case – Pre-Cut Foam – #179
PLEASE DOUBLE CHECK DETAILS AND FITMENT BEFORE PURCHASE.
Condition 1’s 16-Inch 2 Pistol Case #179 is an American-made hard pistol case built for organizing and protecting two handguns, eight magazines, and extra range gear in a dedicated pre-cut foam layout. It is designed, manufactured, and shipped from Sherman, Texas, with an IP67 waterproof/dustproof shell, automatic air valve, lockable design, rubberized handle, steel pin hinge, patented latches, and stackable exterior grooves.
This pre-cut foam version gives each pistol its own fitted slot, plus eight magazine slots and a large dump pocket for accessories. It works well for many common accessorized pistols, including setups with optics, weapon-mounted lights, and magwells, but extended magazines and oversized builds need to be measured before ordering. Available colors are organized below under Variants.
Variants / Options
- Black
- Blue
- FDE
- Gun Metal Gray
- Orange
- Red
- Ranger Green
- Yellow
- Pink
Fitment
- Pre-cut foam holds 2 pistols, 8 magazines, and accessories.
- Pistol forms measure approximately 9.55" long x 1.25" wide at the barrel/muzzle x 1.63" wide at the grip/butt x 5.25" deep.
- Magazine forms measure approximately 0.875" x 1.25" x 5.25" deep.
- Dump pocket measures approximately 8.92" x 6.35" x 5.25" deep.
- Designed to fit many pistols with optics, weapon-mounted lights, and magwells.
- Pre-Cut Foam version includes convoluted egg-crate foam in the lid.
Does NOT fit
- Does not pair well with extended magazines.
- Does not guarantee fit for every pistol, optic, weapon light, magwell, compensator, or oversized setup.
- Does not include firearms, magazines, ammunition, locks, tools, or range accessories.
- Do not assume unusually long pistols, large comps, tall optics, oversized lights, or extended magazine setups will fit without checking the cutout dimensions.
What it does
This case gives two pistols, magazines, and accessories a dedicated hard-case layout instead of letting everything bounce around loose like a toolbox after a cattle drive. The pre-cut foam keeps the loadout organized, the dump pocket gives you room for extra range gear, and the hard shell helps protect against dust, water, impact, and transport abuse.
Why it’s worth it
This is the right size when you want a serious pistol case without dragging around a trunk. It keeps two handguns, mags, and small gear in one clean setup, and the made-in-Texas build gives it a little backbone. Practical, tough, and not trying to be fancy for no reason.
Specs
- Brand: Condition 1
- Model: #179
- Product type: Hard pistol storage case with pre-cut foam
- Pistol capacity: 2 pistols
- Magazine capacity: 8 magazines
- Accessory storage: Large dump pocket
- Interior dimensions: 14.61" x 10.46" x 6.01"
- Exterior dimensions: 16.00" x 13.00" x 6.86"
- Lid depth: 1.76"
- Bottom depth: 4.25"
- Total depth: 6.00"
- Interior volume: 918 cu. in.
- Padlock hole diameter: 0.31"
- Weight with foam: 6.0 lbs
- Weight empty: 5.2 lbs
- Body material: CN-1 resin
- Latch material: CN-1 resin
- Protection rating: IP67 waterproof and dustproof
- Features: Made in USA, lockable, TSA-compliant lock ports, automatic air valve, steel pin hinge, stackable shell, rubberized handle
- Available colors: Black, Blue, FDE, Gun Metal Gray, Orange, Red, Ranger Green, Yellow, Pink
What’s included
- 1 Condition 1 #179 16-inch hard case
- Pre-cut foam insert for 2 pistols and 8 magazines
- Large accessory dump pocket
- Convoluted egg-crate lid foam
- Selected case color
Verify before you buy
- Measure your pistols, optics, weapon lights, magwells, magazines, and accessories before ordering.
- Compare your full pistol setup against the pistol cutout dimensions, not just the case exterior size.
- Extended magazines and oversized pistol setups may not sit cleanly in the foam.
- Good gear still has limits. Physics remains undefeated.
⚠ California Proposition 65 Warning
WARNING: Reproductive Harm — p65warnings.ca.gov
