Pro Series Light-Bearing IWB Holster – Black – Handgun / Weapon Light Fitment Options
PLEASE DOUBLE CHECK DETAILS AND FITMENT BEFORE PURCHASE.
The Mission First Tactical Pro Series Light-Bearing IWB Holster is built for concealed carry setups using specific handgun and weapon-light combinations. These are model-specific holsters, not universal light buckets. Select the exact handgun and weapon light variant before ordering.
Available options are organized below under Variants. The Pro Series light-bearing design uses magnetic retention that does not key off the weapon-mounted light, plus an integrated barrel stabilizer system to help keep the pistol aligned in the holster body.
Fitment
- Glock 19 / 45 Gen 6 / Ruger RXM + Streamlight TLR-1: Fits the listed pistol family with TLR-1 pattern light.
- Glock 19 / 45 Gen 6 / Ruger RXM + Streamlight TLR-7: MFT display data expands this to TLR-7A, TLR-7 X, and TLR-7 HL-X USB light family for this SKU.
- Glock 43X + Streamlight TLR-7 Sub: Fits Glock 43X with TLR-7 Sub.
- Glock 48 / 48 MOS + Streamlight TLR-7 Sub: Fits Glock 48 / 48 MOS with TLR-7 Sub.
- Springfield Hellcat + Streamlight TLR-6: Fits Springfield Hellcat with TLR-6.
- Springfield Hellcat Pro + Streamlight TLR-7: Fits Springfield Hellcat Pro with TLR-7 family light as listed.
- SIG Sauer P365 + Streamlight TLR-7: Fits SIG Sauer P365 with TLR-7 listed by source line.
- SIG Sauer P365XL + Icarus ACE EVO Frame + Streamlight TLR-7 Sub: Fits the Icarus ACE EVO frame configuration with TLR-7 Sub.
- SIG Sauer P365 X-Macro + Streamlight TLR-7: Fits P365 X-Macro with TLR-7 listed by source line.
Does NOT fit
- Does not fit pistols without the required listed light unless MFT confirms the model can run with or without the light.
- Does not fit other weapon lights just because they look close.
- Does not fit non-listed frames, aftermarket grip modules, compensators, or oversized optics unless verified for the exact setup.
- The SIG P365XL Icarus ACE EVO variant is for that specific aftermarket frame setup. Do not buy it for a standard P365XL frame unless you have verified fitment.
What it does
This holster carries compatible handgun-and-light setups inside the waistband with Pro Series retention and concealment features. The magnetic retention system uses a strong neodymium magnet and does not rely on the weapon light as the retention point, while the integrated stabilizer helps keep the pistol aligned inside the holster.
Why it’s worth it
Light-bearing concealed carry is where bad fitment gets expensive fast. This Pro Series lineup gives specific handgun/light combinations instead of vague “fits most lights” nonsense. That matters because the wrong light model can ruin fit even when the pistol model is correct.
At IronKells, we’d rather sell the right holster than sell the wrong one fast. Pick the exact pistol and light combination, verify your setup, and avoid wasting money on the wrong shell.
Specs
- Brand: Mission First Tactical
- Product line: Pro Series Light-Bearing
- Product type: IWB / appendix holster
- Carry style: IWB / appendix, convertible to OWB where supported by Pro Series design
- Hand orientation: Ambidextrous
- Color: Black
- Material: Kydex-style molded holster body
- Retention: In-line Magnetic Retention System listed by MFT
- Magnet strength: 11 lb. maximum pull listed by MFT
- Retention note: MFT states retention does not key off the weapon-mounted light
- Stabilization: Integrated Barrel Stabilizer Insert listed by MFT
- Concealment: Built-in vertical wedge system listed by MFT
- Light-bearing: Yes, model-specific
- Variant option: Handgun / Weapon Light Fitment
What’s included
- Mission First Tactical Pro Series Light-Bearing IWB Holster
- Belt clip / attachment hardware package listed by variant
- Retention and concealment hardware where included by model
Install notes
Set up and test with an unloaded firearm only. Confirm the exact weapon light is installed, fully seated, and matched to the holster variant. Check retention, draw, re-holster, trigger guard coverage, optic clearance, belt clip position, and body-side comfort before carrying loaded.
Verify before you buy
Verify three things before ordering: your exact pistol model, your exact weapon light model, and your exact frame/grip module. “TLR-7” is not always the same as “TLR-7 Sub,” and an Icarus ACE EVO frame is not the same as a standard SIG frame. Holsters do not care about hope.
⚠ Glock Disclaimer
IronKells Armory LLC is not affiliated with, endorsed by, or sponsored by Glock, Inc. or Glock Ges.m.b.H.
All references to GLOCK® are used solely to identify firearm models, parts compatibility, and fitment information for customers. Glock is a federally registered trademark of Glock, Inc. and Glock Ges.m.b.H.
Any product sold on this site referencing Glock is aftermarket, not OEM, and is not manufactured by Glock. Glock does not warranty, authorize, or guarantee the performance, safety, or reliability of any third-party components or modifications.
Firearm parts should be installed by a qualified armorer or gunsmith. Improper installation, modification, or use of aftermarket components may affect firearm safety, reliability, and void manufacturer warranties. By purchasing and installing third-party parts, the buyer assumes all responsibility for safe handling, installation, function testing, and use of their firearm and accessories.
⚠ Trademark & Compatibility Disclaimer
IronKells Armory LLC is not affiliated with, endorsed by, or sponsored by any manufacturer mentioned. All trademarks are the property of their respective owners and are used only to identify compatibility or fitment.
⚠ Install & Compatibility Disclaimer
Installation should be performed by a qualified armorer or gunsmith. Improper installation, modification, or use may affect firearm safety and reliability. Buyer is responsible for verifying compatibility, performing proper function testing, and ensuring safe operation.
