EXPS2-0 – Holographic Sight – 68 MOA Ring & 1 MOA Dot – Black
PLEASE DOUBLE CHECK DETAILS AND FITMENT BEFORE PURCHASE.
The EOTECH EXPS2-0 Holographic Weapon Sight is a black, non-magnified holographic sight with the classic 68 MOA ring and 1 MOA center dot reticle. It gives you fast two-eyes-open target acquisition, side-button controls, a quick-detach lever mount, and a raised lower-third co-witness height for compatible iron sight setups.
This is the EXPS model, not the XPS. That matters. The EXPS gives you the QD lever, side buttons, and raised base. In plain English: easier magnifier use, faster mounting, and less finger yoga.
Fitment
- Mounts to MIL-STD-1913 Picatinny rails.
- Quick-detach lever also fits 1" Weaver rails.
- Raised EXPS base provides lower-third co-witness access with compatible iron sight setups.
- Side-button layout works well when paired with compatible magnifiers.
- This model is not night-vision compatible.
Does NOT Fit
- Does not mount directly to pistol optic cuts, RMR footprints, RMSc footprints, DPP footprints, or similar slide-mounted optic footprints.
- Does not provide night-vision compatible brightness settings.
- Does not include magnification by itself.
- Do not buy this if your firearm does not have a compatible Picatinny or Weaver rail mounting surface.
What It Does
- Provides a 1x holographic aiming system for fast close-to-mid-range shooting.
- Uses a 68 MOA ring with a 1 MOA center dot for speed and precision balance.
- Offers 20 daylight brightness settings.
- Uses side-mounted buttons for easier access, especially when running a magnifier behind the optic.
- Uses an adjustable, locking quick-detach lever for fast mounting and removal.
Why It’s Worth It
The EXPS2-0 is one of those optics people buy because it works, not because the marketing department discovered adjectives. Fast reticle, proven layout, QD mount, lower-third height, and side controls. It is expensive, but it is not mystery-box expensive.
Specs
- Brand: EOTECH
- Model: EXPS2-0
- Optic Type: Holographic weapon sight
- Magnification: 1x
- Reticle: 68 MOA ring with 1 MOA dot
- Color: Black
- Finish: Matte
- Mount: Adjustable locking quick-detach lever
- Rail Fit: MIL-STD-1913 Picatinny / 1" Weaver
- Brightness: 20 daylight settings
- Night Vision Compatible: No
- Battery: 1 CR123 lithium battery
- Battery Life: Up to 1,000 continuous hours at nominal setting 12 at room temperature per current EOTECH listing
- Water Resistance: 10 ft / 3 m depth
- Operating Temperature: -40°F to 140°F
- Weight: 11.2 oz
- Dimensions: 3.8" L x 2.3" W x 2.9" H
- Country of Origin: Made in USA
What’s Included
- EOTECH EXPS2-0 holographic sight
- CR123 battery
- Warranty card / manufacturer documentation
Install Notes
- Mount only to a secure Picatinny or compatible Weaver rail.
- Confirm the QD lever tension is properly adjusted before live fire.
- Zero the optic after installation and re-check zero after hard use or removal/reinstallation.
- Use thread, mount, and torque practices appropriate for the firearm and rail system.
Verify Before You Buy
- Verify your firearm has a Picatinny or compatible Weaver rail.
- Verify you want the EXPS2-0 reticle: 68 MOA ring with 1 MOA center dot.
- Verify you do not need night-vision compatibility. If you do, look at the EXPS3 family instead.
- Verify lower-third co-witness height works with your rifle, mount setup, and iron sights.
- Optics are expensive. Guessing is a dumb tax with batteries.
Disclaimers
⚠ Trademark & Compatibility Disclaimer
IronKells Armory LLC is not affiliated with, endorsed by, or sponsored by any manufacturer mentioned. All trademarks are the property of their respective owners and are used only to identify compatibility or fitment.
⚠ Install & Compatibility Disclaimer
Installation should be performed by a qualified armorer or gunsmith. Improper installation, modification, or use may affect firearm safety and reliability. Buyer is responsible for verifying compatibility, performing proper function testing, and ensuring safe operation.
